Spatter Padder is an effective, economical, non-toxic, anti-spatter compound developed by welding specialists and engineers in conjunction with one of the most prominent medical concerns in the country.

Spatter Padder is effective because it was developed specifically for Metallic Inert Gas ("MIG") welding spatter problems thus it outlasts the best makeshift products by as much as 3:1**

Spatter Padder is economical because it is effective.
** (Less than the cost of a nozzle; it will protect an entire gun for months)

Spatter Padder is non-toxic as it contains no Methylene Chloride or other toxic constituents, thinners or propellants.**

Spatter Padder contains no silicones or other elements harmful to paint or phosphatizing.**

Spatter Padder has been used extensively for over thirty-five years on carbon and galvanized steel, nickel and copper base alloys.**

Spadder Patter contains all food grade (USP) materials.

• Permits easy spatter removal from nozzles, tips, collets, fixtures, clamps, assemblies and all other materials, regardless of process or technique.
• Eliminates abuse of semi-automatic and automatic equipment due to spatter problems.
• Minimizes down time and equipment costs.
• Increases nozzle and contact tip life indefinitely.
• Minimizes fusing of electrode to contact tip (at higher than normal voltage).
• Spatter Padder will not clog gas orifices.
• Spatter Padder will not cause porosity, regardless of amount used.

Directions:
Guns- Apply every four to eight hours or as required.
(depending upon degree of spatter)
Fixtures - Spray as required (See MSDS)

See directions on container for additional information
** Check us out.ask the people who know or try it yourself.